About
CBS Emballages prints blister cards and skinpack cards, from Paris. Send the product, the size and the quantity: the quote goes out within 4 hours, carriage paid.
Who we are
CBS Emballages is in Paris, at 155 rue du Faubourg Saint-Denis. carte-blister.com brings together blister cards, skinpack cards, film and packaging.
We print for manufacturers, packers, and printers who subcontract the card. Cosmetics, pharmacy, household, garden, food: the card goes onto the line.
A request always follows the same path.
- 01 Product, size, quantity
- 02 Proposed card
- 03 Quote within 4 h
- 04 Print approval
- 05 Printing
- 06 Carriage-paid delivery
What we offer
- Blister cardA plastic shell sized to the product, on a printed card with heat-seal varnish.
- Skinpack cardBoard, with a plastic film heat-sealed so it follows the product.
- FilmThermoforming film for shells (PVC, PS, PP) and skinpack film.
- PackagingWe print your cards and pack your products under your name.
How we price a request
The product
What the card carries. Cosmetics, pharmacy, household, garden, food, or another retail item.
The size
Width × height, in mm. Euro-slot, square or rounded corners.
The board
Grammage and grade. Recycled board or virgin fibre.
The colours
Number of colours, front and back. Offset, or digital for short runs.
The quantity
The volume, and where it ships in France or in Europe.
What is not on this page is set in the quote.
What matters
- Heat-seal varnish Last layer. It welds the PP, PVC or APET shell.
- Euro-slot Hang tab for the shelf, with opening perfs.
- Skinpack film Checked while it is made. It follows the product and holds it.
- Print approval Printing starts after you sign off.
- Carriage paid The quote goes out within 4 hours. Delivery in France and in Europe.
- Offset CTP The plate file goes to the press. Up to 12 colours, front and back.
Printed to your size
Offset, CTP: the plate file goes to the press. Then the cut: euro-slot, window, fold. Digital printing is for short runs.
The heat-seal varnish is the last layer. The shell is formed to the product size. You approve the proof before we start printing.
Materials and ecology
We start from materials CBS already supplies. The choice follows the machine, the product and end of life.
- Favour
PP, PET/APET and PE for shells; Surlyn thinner than classic PE for skinpack; recycled or pure-cellulose board.
- Limit
PVC: very hard to recycle, only if the line requires it. Multi-layer complex films: on quote when a barrier is needed.
- End of life
Blister or skinpack card = board + plastic. Not mono-material. Board into the paper stream once separated. Window carton if a bubble is not essential.